Select The Form of Mold Connection


      Concrete block molds are used in concrete block machines. Consequently, the molds must be suitable for the machine to be installed. The mold connection type of each machine may be different. Companies producing concrete block machines design their machines and molds according to their standards and capabilities.
Concrete block molds consist of 2 parts lower mold (female mold) and upper mold (male mold). We divided the connection types into 3 groups. While doing this, we based on how the upper molds are connected to the machine.

1 -  Standard /  Bolt - Nut
This type of connection is the most used type. The upper (male) mold is attached to the machine connection platform with the help of a bolt nut. It is highly preferred because its manufacturing method and connection equipment are low cost and easy to find. This connection method is applied at the beginning and middle class machine systems.

2 -  Pneumatic
The pneumatic connection is based on the principle of fixing the upper (male) mold to the machine mold platform by clamps driven by pneumatic bellows.The system used for rapid mold changing is used in the middle and upper segment concrete block machines.

3 -  Hydraulic
The hydraulic connection is based on the principle that the upper (male) mold fixes the centering pins by the clamps driven by hydraulic pistons to the machine mold platform.The system used for rapid mold changing is used in the middle and upper segment concrete block machines.

With 27 years of experience in the sector, we reflect our quality in the production of floor blocks and wall blocks machine and molds. We are constantly developing ourselves for better quality products. We are justifiably proud of our customers' satisfaction. 
Block Mould Official Website. Block Mould is a Brand of Block Group. Unauthorized copying or use of information and images on the web page is prohibited
2020 Developed By Turkuaznet İnternet ve Bilişim Hizmetleri